Stationary Screw Compressors

Screw Air Compressors

19 series, selected by hole size, depth and duty.

SERIES

19 series in this category

SCREW / LG-SERIES

LG Series Electric Screw Compressors

The LG series is Kaishan's most widely used electric screw compressor, built around a proven airend with direct or belt drive. Controls support pressure setting, fault alarms and multi-unit sequencing. Compact layout suits both central plant air and satellite stations.

View Details →
SCREW / JN-TWO-STAGE

JN Series Two-Stage Screw Compressors

The JN series uses two-stage rotors with intercooling, cutting compression work versus single-stage machines at the same discharge pressure and reaching China's top energy-efficiency grade. Ideal for continuous, high-flow plants and mining sites.

View Details →
SCREW / PMVF

PMVF Permanent-Magnet VSD Screw Compressors

PMVF units combine a permanent-magnet synchronous motor with integrated VSD control. Speed tracks air demand continuously, removing load/unload losses and holding pressure steady — a strong fit for lines with fluctuating demand.

View Details →
SCREW / VSD

Variable-Speed Screw Compressors

Variable-speed machines adjust airend speed from a pressure transmitter signal, avoiding frequent load/unload cycling. Plants whose demand swings between shifts see a clear drop in specific power.

View Details →
SCREW / WATER-COOLED

Water-Cooled Screw Compressors

Water-cooled units remove compression heat through a cooling water circuit, keeping internal temperatures stable in hot, dusty plants. The water loop can tie into site circulating systems or heat-recovery projects.

View Details →
SCREW / OIL-FREE

Oil-Free Screw Compressors

Oil-free airends compress without lubricant in the compression chamber, delivering air free of oil aerosol — suited to food, pharmaceutical, electronics and breathing-air duty. Paired with drying and filtration it meets higher purity classes.

View Details →
SCREW / EXPLOSION-PROOF

Explosion-Proof Air Compressors

Explosion-proof packages are designed for methane, combustible dust or flammable gas atmospheres, with motors and electricals specified to explosion-proof requirements and mining certification routes — for underground, fuel-station and chemical unit duty.

View Details →
SCREW / LOW-PRESSURE

Low-Pressure Screw Compressors & Blowers

Many processes need only 1–5 bar. Compressing to 7–8 bar and then regulating wastes energy; low-pressure machines are far more efficient in that band, serving texturing, air-jet looms, pneumatic conveying and kiln combustion air.

View Details →
SCREW / HIGH-PRESSURE

High-Pressure Compressors (15–300 bar)

The high-pressure range covers 15 to 300 bar with multi-stage compression and intercooling, engineered for high-pressure sealing and heat dissipation. Used for PET bottle blowing, water-jet cutting, breathing-air charging and medium/high-pressure drilling support.

View Details →
SCREW / MEDIUM-PRESSURE

Medium-Pressure Compressors (20–60 bar)

Medium-pressure models fill the 20–60 bar gap, balancing flow and pressure for blow moulding, testing, pneumatic boosting and some drilling duties.

View Details →
SCREW / SCROLL

Scroll Air Compressors

Scroll compressors have few moving parts and low pulsation, far quieter than screw units — a good match for hospitals, laboratories, dental clinics and electronics clean rooms. Modular multi-unit arrangements provide standby switching.

View Details →
SCREW / PISTON

Piston Air Compressors

Piston machines are simple and inexpensive to buy, well suited to small workshops, repair bays, tyre shops and intermittent demand. Kaishan piston platforms have decades of service behind them.

View Details →
SCREW / MINING-PISTON

Mining Piston Compressors (MA Certified)

Mining piston compressors are built for underground conditions with electricals and protection to coal-mine safety requirements, supporting ventilation auxiliaries, pneumatic tools and dewatering equipment.

View Details →
SCREW / PREC

Purayas Series Screw Compressors

The Purayas series targets the general industrial market with a proven airend and standardised controls, offering a balanced price/performance ratio for small and mid-size plants.

View Details →
SCREW / KRSP

KRSP Series Air Compressors

The KRSP series is based on a joint-venture technology platform, with enclosure and controls designed to international practice — useful for projects that specify brand and supply-chain requirements.

View Details →
SCREW / BAIJIAN

Baijian Series Air Compressors

As part of Kaishan's multi-brand portfolio, Baijian covers common power bands and gives buyers more options across budgets and specifications.

View Details →
SCREW / JNF

JNF Oil-Free Screw Blowers

JNF oil-free screw blowers are designed for wastewater aeration, pneumatic conveying and process ventilation: oil-free discharge, low pressure and high flow with efficient operating points.

View Details →
SCREW / PROCESS-GAS

Process Gas Compressors

Process gas compressors handle gas boosting and transport for oil, chemical and plastics industries, with materials, seals and cooling selected to the gas handled.

View Details →
SCREW / CHILLER

Water-Cooled Screw Chillers

Water-cooled screw chillers provide industrial refrigeration and process cooling with screw compressors and shell-and-tube heat exchangers, delivering a stable low-temperature source for plastics, chemicals, food and data-centre support.

View Details →
SELECTION & DELIVERY

We calculate the duty before choosing a model

  • Supplied through Kaishan's own manufacturing system, with airend, rotors and controls matched from one source.
  • Selection is calculated against duty: flow, pressure, dew point and load profile, avoiding oversized packages.
  • Can be delivered as a complete air station with receiver, dryer, filters and piping.

Get a Quote

Screw Air Compressors
RFQ

Need a selection or spare-parts quote?

Send us your duty: industry, air flow or hole size and depth, pressure and site conditions. We reply with a model recommendation and lead time.

+86 186 0902 3297 Email